Performance

1
OBJECT
The purpose of this standard is to establish the
Hydro-Quebec minimum technical requirements
Periodic Maintenance Distribution
equipment used for the integration of a
Network Producer/Client-Producer
of Hydro-Quebec Distribution (HQD).
It also aims to establish a plan for many
periodic nance of this equipment, to which the
Producer/Client-producer must comply.

This standard defines the requirements and conditions governing the metering of medium- and high-voltage applications.

It is meant for Hydro-Québec personnel, licensed electricians, consulting engineers and equipment manufacturers. It also aims to facilitate relations between Hydro-Québec and its customers when medium- or high-voltage electrical installations are installed or modified.

1.1
Purpose of the tests
The tests requested by the Dist
ributeur have two goals:
1.
Demonstrate that the biomass plant meets
the technical requirements of the Distributor
relating to electricity production;
2.
Validate numerical models and parameters
closely associated with the plant, in particular
those provided by the Producer to the Distributor
eur. To this end, the response of the models
will be compared to the recordings
nts taken during the tests;
The success of the validation tests and

This manual defines a series of tests to characterize aspects of the performance or life behavior of
batteries for plug-in hybrid electric vehicle (PHEV) applications. Tests are defined based on the
Vehicle Technologies Program targets for plug-in hybrid electric vehicles, though it is anticipated
these tests may be generally useful for testing energy storage devices for plug-in hybrid vehicles. The
test procedures in this manual are directly applicable to complete battery systems. However, most

1.1 Purpose
The purpose of this document is to identify the technical criteria for use in the assessments of the adequacy and security of the IESO-controlled grid and to clarify how the IESO will apply the relevant NPCC and NERC standards and implement them within Ontario.
1.2 Scope

IEC 62282-2:2012 provides the minimum requirements for safety and performance of fuel cell modules; it applies to fuel cell modules with or without an enclosure which can be operated at significant pressurization levels or close to ambient pressure. Deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of definitions for hazards and hazardous locations based on the IEC 60079 series;

ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.
It is applicable to hydrogen generators that use the following types of ion transport medium:
Group of aqueous bases;
Solid polymeric materials with acidic function group additions such as acid proton exchange membrane (PEM).

This International Standard specifies the quality characteristics of hydrogen fuel in order to assure uniformity of the hydrogen product as produced and distributed for utilization in vehicular, appliance or other fuelling applications.
This International Standard applies to all modes of transportation and hydrogen fuelling applications (ground, water, air and space).

This part of ISO 14687 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.