Certifications

Safety standard for stationary batteries for energy storage applications, non-chemistry specific and includes electrochemical capacitor systems or hybrid electrochemical capacitor and battery systems. Includes requirements for unique technologies such as flow batteries and sodium beta (i.e., sodium sulfur and sodium nickel chloride). Includes construction requirements, tests and production tests. Also includes requirements for cells used in these systems such as lithium-ion, nickel, Lead-Acid and includes sodium beta and flow battery requirements.

IEC 62282-3-100:2012 is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous (unclassified) areas. It contemplates all significant hazards, hazardous situations and events, with the exception of those associated with environmental compatibility (installation conditions), relevant to fuel cell power systems, when they are used as intended and under the conditions foreseen by the manufacturer.

IEC 62282-2:2012 provides the minimum requirements for safety and performance of fuel cell modules; it applies to fuel cell modules with or without an enclosure which can be operated at significant pressurization levels or close to ambient pressure. Deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of definitions for hazards and hazardous locations based on the IEC 60079 series;

ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.
It is applicable to hydrogen generators that use the following types of ion transport medium:
Group of aqueous bases;
Solid polymeric materials with acidic function group additions such as acid proton exchange membrane (PEM).

1 Scope
1.1 These requirements cover battery chargers rated 600 volts or less. They are intended to be used in accordance with the National Electrical Code, NFPA 70, to charge industrial storage batteries which are used to provide power for material handling trucks, tractors, personnel carriers, and similar motive equipment. These chargers may be either cord and plug connected or permanently connected.

Purpose of this Guidebook: This guidebook provides information on the requirements to achieve and renew a Compressed Natural Gas (CNG) Cylinder and Fuel System Inspector personnel certification.
About this Certification: The CNG Cylinder and Fuel System Inspector Certification was developed to meet the needs of fleets of all sizes that use safe, cleaner-burning natural gas to power their vehicles.