Standard

This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications.

Abstract: Specifies requirements for the installation of vented secondary batteries permanently installed in buildings.
Scope:

Scope:
This standard defines the method for determining load unbalance emission limits for customers connecting to, or requesting connection to BC Hydro's public medium-voltage (MV) distribution network. It also describes the assessment process for verifying compliance with prescribed load unbalance emission limits.
Application:
Q4 is intended for application by distribution planning engineers, regionalengineers, designers and power quality engineers for:

The purpose of this standard is to provide requirements for the design, configuration and use of battery chargers for stationary applications. 

1 Scope
1.1 These requirements apply to controls that employ solid-state devices and are intended for specified safety-related protective functions.

1 Scope
1.1 These requirements apply to non-networked embedded microprocessor software whose failure is capable of resulting in a risk of fire, electric shock, or injury to persons.

1.1This Standard applies to control and protective devices, and accessory devices, rated at not more than 1500 V, for starting, stopping, regulating, controlling, or protecting electric motors, generators, heating apparatus, or other equipment used to control

IEC 60730-1:2013+A1:2015 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to controls for building automation within the scope of ISO 16484.

IEC 60730-2-6:2015 applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.