Pertinent

This part of IEC 62282 applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. 

IEC 62282-3-100:2012 is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous (unclassified) areas. It contemplates all significant hazards, hazardous situations and events, with the exception of those associated with environmental compatibility (installation conditions), relevant to fuel cell power systems, when they are used as intended and under the conditions foreseen by the manufacturer.

1
PURPOSE AND APPLICATION
This standard defines the minimum requirements and
technical specifications for the interconnection of
distributed generation to the Hydro-Québec medium-vo
ltage (MV) distribution system. The standard is
also applicable when an existing generati
ng station must be modified or upgraded.
Given the various means of generation, modes of
interconnection and potential system constraints,
Hydro-Québec may define certain specific requirements at the time each case is reviewed.

1 PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for connecting single-phase or three-phase decentralized generation to the Hydro-Québec low voltage (LV) distribution network. It also applies when such a plant is modified or repaired. The plants covered by this document have the following characteristics:
• maximum rated three-phase power of 600 kVA;

1 PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for the connection of
decentralized production without power injection to the low voltage (LV) distribution network and
medium voltage (MV) from Hydro-Québec. This standard applies to all new installations as well as to
those that are subject to modification or repair.
The plants covered by this document must not, under any circumstances, inject current, energy or

1 PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for connecting the
decentralized generation to the Hydro-Québec low voltage (LV) distribution network. Centrals
covered by this document have the following characteristics:
• single-phase maximum nominal power of 20 kW;
• maximum nominal three-phase power of 50 kW;
• use of inverters certified according to section 15 of standard CSA C22.2 no 107.1-01.

1. PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for the temporary paralleling of emergency generation equipment to the Hydro-Québec distribution network.
This standard applies to all new installations as well as those that are modified or repaired.

1
OBJECT AND SCOPE
This standard defines the requirements to be
meet protection relays, inverters
and switches with integrated protections
which are accepted to allow the connection
decentralized production on the Hydro-Québec distribution network.
It defines the qualification process, acceptance criteria and approved equipment for
protective functions.

1
OBJECT
The purpose of this standard is to establish the
Hydro-Quebec minimum technical requirements
Periodic Maintenance Distribution
equipment used for the integration of a
Network Producer/Client-Producer
of Hydro-Quebec Distribution (HQD).
It also aims to establish a plan for many
periodic nance of this equipment, to which the
Producer/Client-producer must comply.