Pertinent

This standard defines the requirements and conditions governing the metering of medium- and high-voltage applications.

It is meant for Hydro-Québec personnel, licensed electricians, consulting engineers and equipment manufacturers. It also aims to facilitate relations between Hydro-Québec and its customers when medium- or high-voltage electrical installations are installed or modified.

1.1
Purpose of the tests
The tests requested by the Dist
ributeur have two goals:
1.
Demonstrate that the biomass plant meets
the technical requirements of the Distributor
relating to electricity production;
2.
Validate numerical models and parameters
closely associated with the plant, in particular
those provided by the Producer to the Distributor
eur. To this end, the response of the models
will be compared to the recordings
nts taken during the tests;
The success of the validation tests and

ISO 13849-1:2015 provides safety requirements and guidance on the principles for the design and integration of safety-related parts of control systems (SRP/CS), including the design of software. For these parts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safety functions. It applies to SRP/CS for high demand and continuous mode, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical, etc.), for all kinds of machinery.

ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation by analysis and testing of the specified safety functions, the category achieved, and the performance level achieved by the safety-related parts of a control system (SRP/CS) designed in accordance with ISO 13849-1.

1. PURPOSE
This protocol is intended to establish design criteria and test procedures applicable to mechanical energy storage systems for the purpose of verifying and documenting the safety of these systems.
2. SCOPE

1.1 Purpose
The purpose of this document is to identify the technical criteria for use in the assessments of the adequacy and security of the IESO-controlled grid and to clarify how the IESO will apply the relevant NPCC and NERC standards and implement them within Ontario.
1.2 Scope

The purpose of this code is to establish the installation requirements for hydrogen generating equipment, hydrogen utilization equipment, hydrogen dispensing equipment, hydrogen storage containers, hydrogen piping systems and their related accessories.
It applies to all gaseous and liquid hydrogen applications except the following:
- The use of hydrogen in petroleum refineries and chemical plants as feedstock and directly in-process production;

IEC 62282-2:2012 provides the minimum requirements for safety and performance of fuel cell modules; it applies to fuel cell modules with or without an enclosure which can be operated at significant pressurization levels or close to ambient pressure. Deals with conditions that can yield hazards to persons and cause damage outside the fuel cell modules. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of definitions for hazards and hazardous locations based on the IEC 60079 series;

ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas.
It is applicable to hydrogen generators that use the following types of ion transport medium:
Group of aqueous bases;
Solid polymeric materials with acidic function group additions such as acid proton exchange membrane (PEM).