References to documents that provides an enhanced understanding of the Codes, Standards and Regulations landscape. References to documents such as documents in draft stage or documents that have been archived are available for information and support the development of future Codes, Standards and Regulations.
The document presents general requirements that Telcordia and participating industry representatives view as applicable to large format non-aqueous rechargeable lithium batteries to replace or interoperate with conventional batteries (i.e., Lead-Acid, nickel-based); function seamlessly with DC power plants; and provide reliable backup power to load equipment in a network environment of a typical telecommunications service provider.
The document provides a 3-level system of VRLA String Safety and Performance Criteria based on Telcordia generic requirements documents. The VRLA string criteria levels are defined as follows: ? Level 1, Safety and Minimal Operability – minimum acceptable level of compliance needed to preclude hazards and degradation of the network facility and hazards to personnel, and needed to ensure battery operability at the installation time in controlled environments.
1.1 These requirements cover electrical energy storage assemblies such as battery packs and combination electrochemical capacitor assemblies and modules that make up these assemblies for use in electric-powered vehicles as defined in this standard.
IEC/TR 62540:2009(E) applies to all stationary lead-acid cells and monobloc batteries for float charge applications (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications. These batteries are covered by IEC 60896-11, IEC 60896-21 and IEC 60896-22.
This International Standard relates to Flow Batteries used in Electrical Energy Storage (EES) applications and provides the main terminology and general aspects of this technology
This standard establishes the minimum job performance requirements necessary for fire service and other emergency response personnel who perform technical rescue operations.
Withdrawn standard. This recommended practice contains application guidelines and procedures for the interconnection and compatible operation of a SWECS with electric utilities. It addresses the interface between the wind system and the utility and the factors relating to equipment protection, power quality, and the safety of operating personnel and the general public.
Withdrawn Standard
Replace this clause of the RD with the following: 1.1.1 Equipment covered by this standard This Standard applies to UPS, whose primary function for this Standard is to ensure continuity of an alternating power source. The UPS may also serve to improve the quality of the power source by keeping it within specified characteristics. This Standard is applicable to movable, stationary, fixed, and built-in UPS for distribution systems up to 600 V AC.
