Informative

The standard identifies and establish levels of functional capability for conducting operations at technical search and rescue incidents while minimizing threats to rescuers. This standard was developed to define levels of preparation and operational capability that should be achieved by any AHJ that has responsibility for technical rescue operations. These defined levels provide an outline of a system used to manage an incident efficiently and effectively to maximize personnel safety and bring about the successful rescue of victims and eventual termination of the event.

A resource for facts on safe response to electric and hybrid vehicle incidents involving damaged high voltage batteries, battery fires, extrication challenges, submersion, and charging stations. This document covers the vital aspects of EV/hybrid hazard awareness and procedures, including information from related NFPA codes and new consistent Moditech Rescue Solutions® vehicle diagrams.

The document provides interim guidance for electric and hybrid-electric vehicles and identifies appropriate post-crash safety measures for vehicle owners and the general public, emergency responders, and for towing/recovery operators and vehicle storage facilities.

Specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this standard do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. This second edition cancels and replaces the first edition, published in 2004, and constitutes a technical revision.

The CWA provides guidance on the specification, installation and operation of flow batteries. It facilitates the pre-commercial phase when flow batteries need to be compared with other flow batteries or other electrical storage devices. It provides guidance to conformity assessment bodes to benchmark flow battery conformity with existing directives and other regulations.

Specifies marking, designation, dimensions, tests and performance requirements for portable sealed Nickel Cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation.

Specifies marking, designation, dimensions, tests and performance requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition published in 2003 of which it constitutes a technical revision.

This standard and standard 62133-2 below are in development and are categorized in: Aerospace electric equipment and systems, Electrical and electronic equipment. These standards address safety of the respective battery chemistries for portable applications.

The standard covers specifies marking, designation, dimensions, tests and requirements for sealed nickel-metal hydride prismatic secondary single cells.

This technical report is in development is categorized in: Acid secondary, Alkaline secondary, Cells & batteries.