Informative

The standard is applicable to mains- or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. Also applicable are components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply.

The document applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. This technical specification presents a quality assurance framework that includes product specifications a framework for interpreting test results test methods and standardized specifications sheets templates for communicating test results.

The standard applies to a micro power plant which is the electric energy generation subsystem associated with a decentralized rural electrification system. It provides general requirements for the design, erection and operation of micro power plants and general requirements to ensure the safety of persons and property. The plants covered by this specification are low-voltage AC, three- or single-phase, with rated capacity less than or equal to 100 kVA.

The standard specifies the general requirements for the design and the implementation of micro grids used in decentralized rural electrification to ensure the safety of persons and property and their satisfactory operation according to the scheduled use.

This part of the standard specifies general safety requirements for stationary energy storages with lithium batteries. The purpose of the requirements of this standard is to ensure that HAZARDS to the operator/user and the surrounding area are reduced to a tolerable level. Requirements for protection against particular types of HAZARDS: electric shock or burn, mechanical hazards, spread of fire from the equipment, excessive temperature, effects of fluids and fluid pressure, liberated gases, explosion, chemical hazards (e.g., electrolyte).

This part of the IEC 62932 series specifies general information relating to the requirements and typical methods of test for flow battery system.

A flow battery is an electrolyte cyclical form battery, and a rechargeable battery mainly applicable to broad applications such as energy storage, independent power supply, grid stabilization, and a stabilization use of renewable energy. This standard is applicable to all flow battery systems.

The scope of this NWIP is to prepare normative documents on safety dealing with: 1) main risks related to couples of use cases and associated technologies; 2) technical contents and results to be included in the safety report and auditing framework; 3) list of main features to be validated by testing; 4) scale at which the storage system must be tested; and 5) recommendations to prevent or mitigate accidental effect.

Scope – Clear definition of what is/is not covered by the standard (e.g., power, voltage, other criteria).

1.1 These requirements cover fixed and location-dedicated electric room heating equipment rated 600 V or less to be employed in ordinary locations in accordance with the NEC, ANSI/NFPA 70. 1.2 These requirements do not cover movable heaters, wall- or ceiling-hung heaters, baseboard heaters, duct heaters, central-heating furnaces, fan-coil units, panel- or cable-type radiant-heating equipment, electric boilers, or any other electric heating equipment or appliances covered in or as a part of separate, individual requirements.