Informative

A flow battery is an electrolyte cyclical form battery, and a rechargeable battery mainly applicable to broad applications such as energy storage, independent power supply, grid stabilization, and a stabilization use of renewable energy. This standard is applicable to all flow battery systems.

The scope of this NWIP is to prepare normative documents on safety dealing with: 1) main risks related to couples of use cases and associated technologies; 2) technical contents and results to be included in the safety report and auditing framework; 3) list of main features to be validated by testing; 4) scale at which the storage system must be tested; and 5) recommendations to prevent or mitigate accidental effect.

Scope – Clear definition of what is/is not covered by the standard (e.g., power, voltage, other criteria).

1.1 These requirements cover fixed and location-dedicated electric room heating equipment rated 600 V or less to be employed in ordinary locations in accordance with the NEC, ANSI/NFPA 70. 1.2 These requirements do not cover movable heaters, wall- or ceiling-hung heaters, baseboard heaters, duct heaters, central-heating furnaces, fan-coil units, panel- or cable-type radiant-heating equipment, electric boilers, or any other electric heating equipment or appliances covered in or as a part of separate, individual requirements.

1.1 These requirements cover Wind Turbine Converter (WTC) products and assemblies. Some of the features and functions of these products include but are not limited to, generation of real and reactive power in parallel with the electric power system, EPS (electric utility grid), supplying power in a standalone operational mode, multiple mode operation, and bidirectional power flow operation with the EPS.

Jan 2005 - Administratively Withdrawn Safety precautions;
The document provides safety precautions, installation design considerations, and procedures for receiving, storing, commissioning, and maintaining pocket- and fiber-plate Nickel Cadmium storage batteries for PV power systems. Disposal and recycling recommendations are also discussed. This recommended practice applies to all PV power systems, regardless of size or application that contain Nickel Cadmium battery storage subsystems.

The document provides alternative approaches and practices for design, operation, maintenance, integration and interoperability, including distributed resources interconnection, of stationary or mobile battery energy storage systems (BESS) with the EPS at customer facilities, electricity distribution facilities or bulk transmission electricity facilities.

The provisions of the IWUCl apply to the construction, alteration, movement, repair, maintenance and use of any building, structure or premises within the wildland urban-interface areas in this jurisdiction. Buildings or conditions in existence at the time of the adoption of this code are allowed to have their use or occupancy continued, if such condition, use or occupancy was legal at the time of the adoption of this code, provided such continued use does not constitute a distinct danger to life or property.

The terms defined in the Dictionary are listed in letter-by-letter alphabetical order. Spaces are ignored in this style of alphabetization, so cable value will come before cab signal. Descriptive categories associated with the term in earlier editions of the Dictionary will follow the term in parentheses. New categories appear after the definitions (see Categories, below), followed by the designation of the standard or standards that include the definition.