Standard

ISO 12405-3:2014 specifies test procedures and provides acceptable safety requirements for voltage class B lithium-ion battery packs and systems, to be used as traction batteries in electrically propelled road vehicles. Traction battery packs and systems used for two-wheel or three-wheel vehicles are not covered by ISO 12405-3:2014. ISO 12405-3:2014 is related to the testing of safety performance of battery packs and systems for their intended use in a vehicle.

This publication presents design guidelines for hydrogen vent systems used in gaseous and liquid hydrogen systems at user sites and provides recommendations for safe operation of these vents. It begins at the discharge port of safety devices and other components that control the release of hydrogen and ends at the point where hydrogen concentration in the atmosphere is below the lower flammable limits. It also provides information on the production, transportation, handling, and storage of compressed hydrogen, cryogenic liquid hydrogen, and related products.

This standard shall apply to the design, installation, acceptance testing, operation, and ongoing periodic testing of smoke control systems. A.1.1 This standard incorporates methods for applying engineering calculations and reference models to provide a designer with the tools to develop smoke control system designs. The designs are based on select design objectives presented in Section 4.1.

IEC 61850-7-420:2009(E) defines IEC 61850 information models to be used in the exchange of information with distributed energy resources (DER), which comprise dispersed generation devices and dispersed storage devices, including reciprocating engines, fuel cells, microturbines, photovoltaics, combined heat and power, and energy storage. Utilizes existing IEC 61850-7-4 logical nodes where possible, but also defines DER-specific logical nodes where needed.

Covers asynchronous data transmission with half duplex and duplex link protocols operating with window size one for message transfers. Specifies the basic requirements for services to be provided by the link plus physical layers, for telecontrol applications. In particular it specifies standards on coding, formatting and synchronizing data frames of variable and filed lengths which meet specified data integrity requirements.
This publication is of high relevance for Smart Grid.

Applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes.
This publication is of high relevance for Smart Grid.

Applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes; specifies rules for structuring application data units in transmission frames of telecontrol systems.
This publication is of high relevance for Smart Grid.

Gives rules for defining information elements and presents a set of information elements, in particular of digital and analog process variables frequently used in telecontrol applications.
This publication is of high relevance for Smart Grid.

Applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment.
This publication is of high relevance for Smart Grid.

IEC 60870-5-6:2006 Specifies methods for conformance testing of telecontrol equipment, amongst substation automation systems and telecontrol systems, including front-end functions of SCADA. Facilitates interoperability by providing a standard method of testing protocol implementations. Is expected to minimize the risk of non-interoperability.