Requirements

1 PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for connecting the
decentralized generation to the Hydro-Québec low voltage (LV) distribution network. Centrals
covered by this document have the following characteristics:
• single-phase maximum nominal power of 20 kW;
• maximum nominal three-phase power of 50 kW;
• use of inverters certified according to section 15 of standard CSA C22.2 no 107.1-01.

1. PURPOSE AND FIELD OF APPLICATION
This standard defines the minimum technical requirements and specifications for the temporary paralleling of emergency generation equipment to the Hydro-Québec distribution network.
This standard applies to all new installations as well as those that are modified or repaired.

1
OBJECT AND SCOPE
This standard defines the requirements to be
meet protection relays, inverters
and switches with integrated protections
which are accepted to allow the connection
decentralized production on the Hydro-Québec distribution network.
It defines the qualification process, acceptance criteria and approved equipment for
protective functions.

1
OBJECT
The purpose of this standard is to establish the
Hydro-Quebec minimum technical requirements
Periodic Maintenance Distribution
equipment used for the integration of a
Network Producer/Client-Producer
of Hydro-Quebec Distribution (HQD).
It also aims to establish a plan for many
periodic nance of this equipment, to which the
Producer/Client-producer must comply.

This standard defines the requirements and conditions governing the metering of medium- and high-voltage applications.

It is meant for Hydro-Québec personnel, licensed electricians, consulting engineers and equipment manufacturers. It also aims to facilitate relations between Hydro-Québec and its customers when medium- or high-voltage electrical installations are installed or modified.

1.1
Purpose of the tests
The tests requested by the Dist
ributeur have two goals:
1.
Demonstrate that the biomass plant meets
the technical requirements of the Distributor
relating to electricity production;
2.
Validate numerical models and parameters
closely associated with the plant, in particular
those provided by the Producer to the Distributor
eur. To this end, the response of the models
will be compared to the recordings
nts taken during the tests;
The success of the validation tests and

1.1 Purpose
The purpose of this document is to identify the technical criteria for use in the assessments of the adequacy and security of the IESO-controlled grid and to clarify how the IESO will apply the relevant NPCC and NERC standards and implement them within Ontario.
1.2 Scope

This document was prepared by BC Hydro (BCH) to guide generator owners and proponents in connecting generators to the BCH distribution system at 35 kV and below. It applies to all generators, whether utility or non-utility owned, and these generating plants are referred to as a Power Generator (PG).