Lighting

The document applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. This technical specification presents a quality assurance framework that includes product specifications a framework for interpreting test results test methods and standardized specifications sheets templates for communicating test results.

1.1 This Standard applies to emergency lighting and power equipment for use in unclassified locations and intended for connection to branch circuits 600 V or less. Intended to supply illumination, power or both automatically to critical areas and equipment in the event of failure of normal supply in accordance with NEC Article 700 or 701, NFPA 70, Life Safety Code, NFPA 101, Fire Code, NFPA 1, International Building Code (IBC) and International Fire Code (IFC).

1.1 These requirements cover instrument batteries, enclosed batteries, emergency lighting and power batteries and uninterruptible power supply batteries of the valve regulated or vented type. A battery system composed of vented or valve regulated types with battery management controls and other battery system components, and other chemistries or battery types are covered by the Standard for Batteries for Use in Light Electric Rail (LER) Applications and Stationary Applications, UL 1973.

Background on light flicker caused by fluctuations in power demands of variable loads is presented in this recommended practice. A flicker measurement method is presented using a meter that is completely described in IEC 61000-4-15. The short-term (Pst) and long-term (Plt) flicker indices used for the analysis of flicker data are defined. Flicker limits for various voltage levels are presented. An assessment procedure for evaluating flicker compliance against emission limits is described.

This part of IEC 61982 is applicable to performance and life testing of electrical energy storage systems for general purpose, traffic compatible, light urban use electric road vehicles that are designed for transportation of passengers or goods in city centre driving. For the purposes of this standard, the electrical energy storage system is defined as one that is recharged electrically though some of the test procedures may be applicable to fuel cells and other "mechanically" rechargeable systems.

Approval stage

Abstract: Specifies requirements for the installation of vented secondary batteries permanently installed in buildings.
Scope: