Recherche de CNR

Recherche dans le texte

Pertinence

Composante du système

Type de technologie SE

Référence	Sommaire
ANSI Z21.94-2006/CSA 6.31-2006 (R2016)	Automatic Flammable Vapor Sensor Systems and Components
UL 101	Leakage Current for Appliances
ANSI Z21.13-2017/CSA 4.9-2017	Gas-fired low pressure steam and hot water boilers 1.1 This Standard applies to newly produced gas-fired low-pressure steam and hot water boilers with gas inlet pressure ratings not exceeding 0.5 psi (3.5 kPa) and having input ratings of less than 12,500,000 Btu/hr (3 663 389 W) (see Clause 3, Definitions), hereinafter…
ASCE/SEI 7-10	Minimum Design Loads for Buildings and Other Structures Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10, is a complete revision of ASCE Standard 7-05. ASCE 7-10 offers a complete update and reorganization of the wind load provisions, expanding them from one chapter into six to make them more understandable…
ASCE/SEI 7-10	Charges de conception minimales pour les bâtiments et autres structures Les charges de conception minimales pour les bâtiments et autres structures, ASCE/SEI 7-10, est une révision complète de la norme ASCE 7-05. L'ASCE 7-10 propose une mise à jour complète et une réorganisation des dispositions relatives à la charge de vent, en les étendant d'un…
ACI 318M-14	Metric Building Code Requirements for Structural Concrete and Commentary 1.1.1 — This code provides minimum requirements for design and construction of structural concrete elements of any structure erected under requirements of the legally adopted general building code of which this code forms a part. In areas without a legally adopted building…
C812-16	Energy performance of large battery charger systems This Standard specifies the test method for measuring and reporting the energy performance of large battery charger systems.
CAN/CSA-E61951-2:14	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride (Adopted IEC 61951-2:2011, third edition, 2011-05, with Canadian deviations) This part of IEC 61951 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation
CAN/CSA-E61951-1:14	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium (Adopted IEC 61951-1:2013, third edition, 2013-10, with Canadian deviations) This part of IEC 61951 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation.
CAN/CSA-E60335-2-29-06 (R2016)	Household and Similar Electrical Appliances - Safety - Part 2-29: Particular Requirements for Battery Chargers (Adopted CEI/IEC 60335-2-29:2003, fourth edition, 2002-09, with Canadian deviations) This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. Battery chargers not intended for normal household use, but which…