Recherche de CNR

Recherche dans le texte

Pertinence

Composante du système

Type de technologie SE

Référence	Sommaire
CAN/CSA-E61558-1:12 (R2017)	Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) This International Standard deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. This standard covers the following types of dry-type transformers, power supplies, including…
C22.2 NO. 141-15	Emergency lighting equipment 1.1 This Standard applies to exit signs, unit equipment, emergency luminaires, and central power systems intended for connection to circuits with nominal voltages of 600 V and less and providing illumination in the event of a failure of the normal power supply for…
C22.2 NO. 107.1-16	Power conversion equipment 1.1 This Standard applies to ac and dc type power conversion equipment (PCE) that a) is of dry or liquid-filled construction; b) has a rated voltage not exceeding 1500 V; and c) is for commercial, industrial, and residential indoor and outdoor use…
UL 9540A	Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems 1.1 The requirements in this document evaluate the fire characteristics of a battery energy storage system that undergoes thermal runaway. The data generated will be used to determine the fire and explosion protection required for an installation of a battery energy storage…
Norme IEEE 1818-2017	IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations Description: Considered in this guide are the components of both the ac and dc systems and the provided guidelines and recommendations for designing the appropriate systems for the substation under consideration. This guide includes the low-voltage auxiliary systems from the…
IEEE Std 1476-2000	IEEE Standard for Passenger Train Auxiliary Power Systems Interfaces Description: The electrical interfaces among the components comprising the auxiliary power systems and their electrical interface with other train-borne systems are described.
IEEE Std 1568-2003	IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles A method for defining the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is described in this recommended practice.
IEEE Std 1881-2016	IEEE Standard Glossary of Stationary Battery Terminology Description: Terms currently in use in the field of stationary batteries are defined in this standard. This standard does not include terms specific to battery manufacturing activities or to nonstationary battery applications such as motive, portable, marine, or other…
IEEE Std 1676-2010	IEEE Guide for Control Architecture for High Power Electronics (1 MW and Greater) Used in Electric Power Transmission and Distribution Systems Control architecture for high-power electronics from power semiconductor device levels to the power system level is defined and characterized. Coverage includes the application of power electronics in the areas of Power Quality/Custom Power, Flexible AC Transmission Systems (…
IEEE 2030.7-2017	IEEE Approved Draft Standard for the Specification of Microgrid Controllers Description: The reason for establishing a standard for the Microgrid Energy Management System (MEMS) is to enable interoperability of the different controllers and components needed to operate the MEMS through cohesive and platform-independent interfaces.