Testing, reliability & durability

The technical specifications for, and testing of, the interconnection between utility electric power systems (EPS) and distributed energy resources (DER) are the focus of this standard. It provides requirements relevant to the performance, operation, testing, safety considerations, and maintenance of the interconnection. It also includes general requirements, response to abnormal conditions, power quality, islanding, and test specifications and requirements for design, production, installation evaluation, commissioning, and periodic tests.

BC Hydro provides a means for distribution-connected customers to connect a small energy source to the BC Hydro Distribution System to offset their load and participate in the Net Metering program (RS1289) or other energy procurement offers. This document contains the technical interconnection requirements for connecting small generators to BC Hydro’s Distribution System. The total generation must have an aggregate nameplate rating of 100 kW or less. DGs with generation over this limit should refer to BC Hydro Interconnection Requirements for Power Generators 35 kV and Below.

This standard provides requirements for the application, location, installation, performance, testing, and maintenance of electronic premises security systems and their components. Provisions define the means of signal initiation, transmission, notification, and annunciation; the levels of performance; and reliability.

This standard protects life and property from fire through the standardization of design, installation, maintenance, and testing requirements for water mist fire-suppression systems.

This standard covers performance requirements for emergency and standby power systems providing an alternate source of electrical power in buildings and facilities in the event that the normal electrical power source fails. Systems include power sources, transfer equipment, controls, supervisory equipment, and accessory equipment needed to supply electrical power to the selected circuits.

This standard provides technical requirements for exhaust systems that will protect lives and property from fires and explosions and minimize damage in the event that such fires and explosions occur.

In June 2015, the ASME Council on Standards and Certification approved the creation of a new Standards Committee on Safety Standards for Thermal Energy Storage Systems (TES).

Intended Use
The objective of Standards issued as part of the Canadian Electrical Code, Part II, is to give consideration to the prevention of injury to persons and damage to property through proper design, good construction, and high quality of work. These safety Standards are intended to provide requirements for the design and construction of electrical equipment, primarily to address fire and electrical shock hazards and for use throughout Canada in conformity with the rules of the Canadian Electrical Code, Part I.

Methods for qualifying static battery chargers and inverters for Class 1E installations outside containment in nuclear power generating stations are described. These methods may also be used to qualify similar electronic equipment for use in applications outside containment, where specific standards for such equipment are not available. The qualification methods set forth employ a combination of type testing and analysis, the latter including a justification of methods, theories, and assumptions used. These procedures meet the requirements of IEEE Std 323™-2003