Specifications

IEC/TR 61850-90-5:2012(E) provides a way of exchanging synchrophasor data between PMUs, PDCs WAMPAC (Wide Area Monitoring, Protection, and Control), and between control center applications. The data, to the extent covered in IEEE C37.118-2005, are transported in a way that is compliant to the concepts of IEC 61850. However, given the primary scope and use cases, this document also provides routable profiles for IEC 61850-8-1 GOOSE and IEC 61850-9-2 SV packets. These routable packets can be utilized to transport general IEC 61850 data as well as synchrophasor data.

IEC/TR 61850-90-7:2013(E) describes the functions for power converter-based distributed energy resources (DER) systems, focused on DC-to-AC and AC-to-AC conversions and including photovoltaic systems (PV), battery storage systems, electric vehicle (EV) charging systems, and any other DER systems with a controllable power converter.

Distribution Automation and Feeder Automation Distribution Automation (DA) as a concept emerged in the 1970s to promote the application of computer and communications technologies for improving of distribution system operating performance. It is in general used as an umbrella term to describe the deployment of automation technologies for protection, control, monitoring, and operation of distribution systems.

The current document mainly describes the following functions of Distribution/Feeder Automation Systems:

Use of IEC 61850 for Electrical Energy Storage Systems is progressing these days. The latest draft describes the basic functions of Electric Energy Storage System (EESS) and the information model of the interface to integrate EESS in intelligent grids and establish the necessary communication with standardised data objects. The next official draft is expected to be published soon.

IEC 61869-9:2016 is a product family standard applicable to instrument transformers with digital output. The product standard is composed of IEC 61869-1 and IEC 61869-6, in addition to this standard and the relevant product specific standards in the IEC 61869 series (Part 7, Part 8, Part 12, Part 13, Part 14, and Part 15). This standard defines requirements for digital communications of instrument transformer measurements.

ISO 6469-1:2009 specifies requirements for the on-board rechargeable energy storage systems (RESS) of electrically propelled road vehicles, including battery-electric vehicles (BEVs), fuel-cell vehicles (FCVs) and hybrid electric vehicles (HEVs), for the protection of persons inside and outside the vehicle and the vehicle environment. Flywheels are not included in the scope of ISO 6469-1:2009.
ISO 6469-1:2009 does not apply to RESS in motorcycles and vehicles not primarily intended as road vehicles, such as material handling trucks or fork-lift trucks.

ISO 6469-2:2018 specifies requirements for operational safety specific to electrically propelled road vehicles, for the protection of persons inside and outside the vehicle.
NOTE 1 Relevant requirements for motorcycles and mopeds are described in ISO 13063.
ISO 6469-2:2018 does not provide comprehensive safety information for manufacturing, maintenance and repair personnel.
ISO 6469-2:2018 does not consider specific aspects of driving automation features.
NOTE 2 For definition of the term "driving automation features", see SAE J3016.

Provides information on the physical and chemical properties of hydrogen and proper handling and use. It is intended to provide background information for personnel involved in the manufacture, distribution, and use of hydrogen. Additional technical information can be obtained from hydrogen gas manufacturers.