Installation

The Alberta Distributed Generation Interconnection Guide provides guidelines for connecting a generation facility to the Alberta Interconnected Electric System (AIES) via a Wires Owner’s distribution system, and assists in determining the technical and operating requirements of the facility. The Guide was developed by the Alberta Distributed Generation Technical and Policy Committee without regard to whether its adoption may involve patents on articles, materials or processes.

BC Hydro provides a means for distribution-connected customers to connect a small energy source to the BC Hydro Distribution System to offset their load and participate in the Net Metering program (RS1289) or other energy procurement offers. This document contains the technical interconnection requirements for connecting small generators to BC Hydro’s Distribution System. The total generation must have an aggregate nameplate rating of 100 kW or less. DGs with generation over this limit should refer to BC Hydro Interconnection Requirements for Power Generators 35 kV and Below.

This standard provides requirements for the application, location, installation, performance, testing, and maintenance of electronic premises security systems and their components. Provisions define the means of signal initiation, transmission, notification, and annunciation; the levels of performance; and reliability.

This standard protects life and property from fire through the standardization of design, installation, maintenance, and testing requirements for water mist fire-suppression systems.

This standard covers performance requirements for emergency and standby power systems providing an alternate source of electrical power in buildings and facilities in the event that the normal electrical power source fails. Systems include power sources, transfer equipment, controls, supervisory equipment, and accessory equipment needed to supply electrical power to the selected circuits.

This code provides fundamental safeguards for the generation, installation, storage, piping, use, and handling of hydrogen in compressed gas (GH2) form or cryogenic liquid (LH2) form. Provisions apply to the production, storage, transfer, and use of hydrogen in all occupancies and on all premises.

This standard provides technical requirements for exhaust systems that will protect lives and property from fires and explosions and minimize damage in the event that such fires and explosions occur.

The National Fire Code of Canada 2015 (NFC), published by NRC and developed by the Canadian Commission on Building and Fire Codes, sets out the technical provisions regulating activities related to the construction, use or demolition of buildings and facilities, the condition of specific elements of buildings and facilities, and the design or construction of specific elements of facilities related to certain hazards as well as the protection measures for the current or intended use of buildings.

The National Plumbing Code of Canada 2015 (NPC), published by NRC and developed by the Canadian Commission on Building and Fire Codes, sets out technical provisions for the design and installation of new plumbing systems and also applies to the extension, alteration, renewal and repair of existing plumbing systems.