ES Engineering & Procurement...

This guideline is intended to assist the customer in understanding the connection process that results in connection of the customer's generation facility to Hydro Ottwwa's distribution network. This guideline does not provide all the details of costs or responsibilities that the customer may assume; such details will be evaluated for each specific request.

This standard details methods for defining the DC loads and for sizing a Lead-Acid battery to supply those loads in full-float operation.

The guide applies to all types of static power converters used in industrial and commercial power systems. The problems involved in the harmonic control and reactive power compensation of such converters are addressed, and an application guide is provided. Limits of disturbances to the AC power distribution system that affect other equipment and communications are recommended.

Jan 2005 - Administratively Withdrawn Safety precautions;
The document provides safety precautions, installation design considerations, and procedures for receiving, storing, commissioning, and maintaining pocket- and fiber-plate Nickel Cadmium storage batteries for PV power systems. Disposal and recycling recommendations are also discussed. This recommended practice applies to all PV power systems, regardless of size or application that contain Nickel Cadmium battery storage subsystems.

The document provides guidance for the installation and installation design of VRLA batteries. This recommended practice is intended for all standby stationary installations. However, specific applications, such as emergency lighting units and semi-portable equipment, may have other appropriate practices and are beyond the scope of this recommended practice. Alternative energy applications are not covered.

This code establishes regulations affecting or relating to structures, processes, premises and safeguards regarding: 1. The hazard of fire and explosion arising from the storage, handling or use of structures, materials or devices; 2. Conditions hazardous to life, property or public welfare in the occupancy of structures or premises; 3. Fire hazards in the structure or on the premises from occupancy or operation; 4. Matters related to the construction, extension, repair, alteration or removal of fire suppression or alarm systems; and 5.

Applicable to substation automation systems: defines communication between intelligent electronic devices in substation and system requirements; provides overview of standard series; refers to text and figures from other parts of IEC 61850 series.

The document presents the procedures to be followed for the classification of lithium metal and lithium ion cells and batteries (see UN Nos. 3090, 3091, 3480 and 3481, and the applicable special provisions of Chapter 3.3 of the Model Regulations). 38.3.2 Scope 38.3.2.1 All cell types shall be subjected to tests T.1 to T.6 and T.8. All non-rechargeable battery types, including those composed of previously tested cells, shall be subjected to tests T.1 to T.5. All rechargeable battery types, including those composed of previously tested cells, shall be subjected to tests T.1 to T.5 and T.7.

Covers VRLA batteries, used as a reserve energy source that supports DC-powered telecommunications load equipment. Defines the proper operational use, storage conditions and test criteria initial and lifetime for VRLA cells (modules). Intended to be used to establish initial physical and performance characteristics of VRLA cells or modules, performance expectations throughout their lifetime and operations conditions for appropriate use and guidance for designers of these cells or modules.

Specifies marking, designation, dimensions, tests and performance requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition published in 2003 of which it constitutes a technical revision.