Other Power Equipment

Description

Category out of scope of this review, however kept as a place holder for relevant CSR and lesson-learned

ANSI C84.1-2016

Identifier
ANSI C84.1-2016
Title
Electric Power Systems and Equipment - Voltage Ratings (60 Hz)
Type of Document
Standard
Edition Date
2016 Jan 01
Summary

1.1 Scope This standard establishes nominal voltage ratings and operating tolerances for 60-hertz electric power systems above 100 volts. It also makes recommendations to other standardizing groups with respect to voltage ratings for equipment used on power systems and for utilization devices connected to such systems. This standard includes preferred voltage ratings up to and including 1200 kV maximum system voltage, as defined in the standard.

IEC TS 62257-9-1:2016

Identifier
IEC TS 62257-9-1:2016
Title
Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-1: Integrated systems - Micropower systems
Type of Document
Technical Specification
Publisher
Edition Date
2016 Sep 27
Summary

The standard applies to a micro power plant which is the electric energy generation subsystem associated with a decentralized rural electrification system. It provides general requirements for the design, erection and operation of micro power plants and general requirements to ensure the safety of persons and property. The plants covered by this specification are low-voltage AC, three- or single-phase, with rated capacity less than or equal to 100 kVA.

UL 9540

Identifier
UL 9540
Title
Outline of Investigation for Safety for Energy Storage Systems and Equipment
Type of Document
Requirements
Edition Date
2016 Nov 21
Summary

These requirements cover ESS that are intended to store energy from power or other sources and provide electrical or other types of energy to loads or power conversion equipment. The ESS may include equipment for charging, discharging, control, protection, communication, controlling the system environment, fuel or other fluid movement and containment, etc. The system may contain other ancillary equipment related to the functioning of the energy storage system.

AS/NZS - 3000 (2007)

Identifier
AS/NZS - 3000 (2007)
Title
Electrical installations (known as the Australian/New Zealand Wiring Rules)
Type of Document
Standard
Edition Date
2016 Jan 01
Summary

The standard sets out requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations. These requirements are intended to protect persons, livestock, and property from electric shock, fire and physical injury hazards that may arise from an electrical installation that is used with reasonable care and with due regard to the intended purpose of the electrical installation.

ES Main Coverage
Site, Building and Enclosure Coverage

IEC 61000-6-1

Identifier
IEC 61000-6-1
Title
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
Type of Document
Standard
Publisher
Country Coverage
Edition Date
2016 Aug 10
Summary

There are various sub standards (6-1, 6.-2, etc.) that apply to EMC. Information from IEC 61000-6-1 covers EMC immunity requirements for electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists.

ES Main Coverage
Site, Building and Enclosure Coverage

Data Sheet 5-10

Identifier
Data Sheet 5-10
Title
Protective Grounding for Electric Power Systems and Equipment
Type of Document
Report
Edition Date
2011 Jan 01
Summary

The document describes the various methods used for grounding electrical systems and the non-current carrying metal parts of electrical wiring systems and equipment and also discusses the advantages and disadvantages of the different grounding methods, and the means employed to safeguard property from arc damage and fire.

NFPA 70E

Identifier
NFPA 70E
Title
Standard for Electrical Safety in the Workplace
Type of Document
Standard
Edition Date
2018 Jan 01
Summary

NFPA 70E requirements for safe work practices to protect personnel by reducing exposure to major electrical hazards. Originally developed at Occupational Safety and Health Administration (OSHA)’s request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities due to shock, electrocution, arc flash and arc blast, and assists in complying with OSHA 1910 Subpart S and OSHA 1926 Subpart K.

ES Main Coverage
Site, Building and Enclosure Coverage

CAN/CSA-C22.2 NO. 0-10 (R2015)

Identifier
CAN/CSA-C22.2 NO. 0-10 (R2015)
Title
General Requirements – Canadian Electrical Code, Part II
Type of Document
Code
Edition Date
2010 Jan 01
Summary

Intended Use
The objective of Standards issued as part of the Canadian Electrical Code, Part II, is to give consideration to the prevention of injury to persons and damage to property through proper design, good construction, and high quality of work. These safety Standards are intended to provide requirements for the design and construction of electrical equipment, primarily to address fire and electrical shock hazards and for use throughout Canada in conformity with the rules of the Canadian Electrical Code, Part I.

ES Main Coverage
Site, Building and Enclosure Coverage