Identify if the document is pertinent for the particular element, or is relevant for information only.
This guideline is primarily intended to provide an overview of the application process involved in becoming a distributed generator. If a prospective power plant owner plans to generate electric energy and the power plant capacity rating is less than one MW, the applicant may proceed without filing an application with the Alberta Utilities Commission (AUC) if the following three requirements are met: ? No person is directly and adversely affected. ? The power plant complies with AUC Rule 012: Noise Control (AUC Rule 012). ? There is no effect on the environment.
The scope of this document is to provide guidelines for consistant and standard applications for voltage and power quality requirements on or connected to HOL’s distribution system. Normally voltage limits, voltage distortion, and current distortion are measured at the customer’s Point of Supply as per HOL document ECS0012. This document does not cover the following power quality issues: • Voltage control when the Independent Electrical System Operator (IESO) has declared a voltage reduction or an electrical system emergency; • Non-standard conditions such as a force majeure (e.g.
This guideline is intended to assist the customer in understanding the connection process that results in connection of the customer's generation facility to Hydro Ottwwa's distribution network. This guideline does not provide all the details of costs or responsibilities that the customer may assume; such details will be evaluated for each specific request.
Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10, is a complete revision of ASCE Standard 7-05. ASCE 7-10 offers a complete update and reorganization of the wind load provisions, expanding them from one chapter into six to make them more understandable and easier to follow.
The California Building Standards Code, Title 24 serves as the basis for the design and construction of buildings in California. Improved safety, sustainability, maintaining consistency, new technology and construction methods, and reliability are paramount to the development of building codes during each Triennial and Intervening Code Adoption Cycle.
