Specifications

This standard specifically applies to UPS with an electrical energy storage device in the DC link. It is used with IEC 60950-1, referred to in this standard as reference document (RD). It is applicable to UPS that are movable, stationary, fixed or for building-in, for use in low-voltage distribution systems and intended to be installed in any operator accessible area or in restricted access locations as applicable. It specifies requirements to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for the service person.

The document applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. This technical specification presents a quality assurance framework that includes product specifications a framework for interpreting test results test methods and standardized specifications sheets templates for communicating test results.

The standard applies to a micro power plant which is the electric energy generation subsystem associated with a decentralized rural electrification system. It provides general requirements for the design, erection and operation of micro power plants and general requirements to ensure the safety of persons and property. The plants covered by this specification are low-voltage AC, three- or single-phase, with rated capacity less than or equal to 100 kVA.

The standard specifies the general requirements for the design and the implementation of micro grids used in decentralized rural electrification to ensure the safety of persons and property and their satisfactory operation according to the scheduled use.

This part of the standard specifies general safety requirements for stationary energy storages with lithium batteries. The purpose of the requirements of this standard is to ensure that HAZARDS to the operator/user and the surrounding area are reduced to a tolerable level. Requirements for protection against particular types of HAZARDS: electric shock or burn, mechanical hazards, spread of fire from the equipment, excessive temperature, effects of fluids and fluid pressure, liberated gases, explosion, chemical hazards (e.g., electrolyte).

This part of the IEC 62932 series specifies general information relating to the requirements and typical methods of test for flow battery system.

A flow battery is an electrolyte cyclical form battery, and a rechargeable battery mainly applicable to broad applications such as energy storage, independent power supply, grid stabilization, and a stabilization use of renewable energy. This standard is applicable to all flow battery systems.

The scope of this NWIP is to prepare normative documents on safety dealing with: 1) main risks related to couples of use cases and associated technologies; 2) technical contents and results to be included in the safety report and auditing framework; 3) list of main features to be validated by testing; 4) scale at which the storage system must be tested; and 5) recommendations to prevent or mitigate accidental effect.

This guidance provides for the protection of stationary battery systems, which include the battery and DC components to and including the first protective device downstream of battery terminals. Recommendations are not intended to set requirements; rather, they present options to the battery system designer concerning the types of protection available.

The ISO 9000 family addresses various aspects of quality management and contains some of ISO’s best known standards. The standards provide guidance and tools for companies and organizations who want to ensure that their products and services consistently meet customer’s requirements, and that quality is consistently improved.